Rockwell Automation 1336T ControlNet Frn1.02 Rev 1.5 - Manual (Page 10)

Preface P–3
Publication 1336 FORCE–5.18 –– March, 1999
!
ATTENTION: This board contains ESD (electrostatic
discharge) sensitive parts and assemblies. Static
control precautions are required when installing,
testing, servicing, or repairing this assembly.
Component damage may result if you do not follow
ESD control precautions. If you are not familiar with
static control procedures, refer to Guarding Against
Electrostatic Damage, Allen-Bradley Publication
8000-4.5.2, or any other applicable ESD protection
handbook.
ATTENTION: Only personnel familiar with
SCANport devices and associated machinery should
plan or implement the installation, start-up, or
subsequent troubleshooting of this board. Failure to
comply may result in personnel injury and/or
equipment damage.
Related Documentation
The following documents contain additional information concerning
related Allen–Bradley products. To obtain a copy, contact your local
Allen–Bradley office or distributor.
For: Read this document: Document number:
A description of function blocks and function
block programming
1336 FORCE

PLC Communications
Adapter Function Block Programming
Manual 1336 FORCE-5.9
Information to help you install, program, start up,
and maintain the 1336 FORCE digital AC drive 1336 FORCE

Field Oriented
Control User Manual
1336 FORCE-5.12
In-depth information on grounding and wiring
Allen-Bradley programmable controllers
Allen-Bradley Programmable
Controller Grounding and Wiring
Guidelines
1770-4.1*
A description on how to install a PLC-5

system
PLC-5 Family Programmable
Controllers Hardware Installation
Manual
1785-6.6.1*
A description of important differences between
solid-state programmable controller products and
hard-wired electromechanical devices
Application Considerations for
Solid-State Controls
SGI-1.1
An article on wire sizes and types for grounding
electrical equipment
National Electrical Code
Published by the
National Fire
Protection Association
A complete listing of current Allen–Bradley
documentation, including ordering instructions.
Also indicates whether the documents are available
on CD-ROM or in multi–languages.
Allen-Bradley Publication Index SD499
A glossary of industrial automation terms and
abbreviations Allen-Bradley Industrial Automation
Glossary
AG-7.1
A glossary of ControlNet terms and abbreviations
ControlNet Network System
Overview
1786-2.9*
PLC–5 Programmable Controllers ControlNet PLC–5 User Manual 1.5 1785–6.5.22