Rockwell Automation 1336T ControlNet Frn1.02 Rev 1.5 - Manual (Page 128)

Chapter
5
Publication 1336 FORCE–5.18 ––March, 1999
Understanding the Resources
of Your Drive
Chapter 5 provides information about using the resources that are
available with your drive. The following topics are covered in this
chapter:
•
understanding the SCANport logic control and operation
•
understanding function blocks
•
using system resources
You can make some changes to the default configuration to
customize the way SCANport works for you. This section covers the
following topics:
•
understanding the logic command parameter
•
configuring the SCANport controls
•
setting the loss of communications fault
•
viewing the SCANport faults and warnings
•
using the SCANport image
•
setting the analog I/O parameters
Understanding the Logic Command Parameter
The Logic Command parameter (parameter 52) on the 1336 FORCE
is modified by receiving input from ChA Logic Cmd In, and
SCANport devices 1 through 5 on the ControlNet Adapter Board.
To use these parameters effectively, you need to understand how the
Logic Command parameter works.
Chapter Objectives
Using the SCANport
Capabilities