Rockwell Automation 1336T ControlNet Frn1.02 Rev 1.5 - Manual (Page 208)

8–6 Using the Trend Features
Publication 1336 FORCE–5.18 ––March, 1999
1.
If you want the trend to
be:
Then enter the post trigger samples
in:
Continuous 1
Oneshot 0
2.
If you are programming
Trend:
Then enter the post trigger samples
in:
1 Parameter 460
2 Parameter 470
3 Parameter 480
4 Parameter 490
3.
If you want the trend to
be:
Then enter the post trigger samples
in:
Disabled 0
Enabled 1
Forced to Trigger 2
4.
If you are programming
Trend:
Then enter the mode value in:
1 Parameter 461
2 Parameter 471
3 Parameter 481
4 Parameter 491
Setting the Trend Mode
and Selection