Rockwell Automation 1336T ControlNet Frn1.02 Rev 1.5 - Manual (Page 161)

6–19 Parameters
Publication 1336 FORCE–5.18 ––March, 1999
343 Data Output A1
[Data Out A1]
Data Out A1 contains the first image word from the
SCANport input image table.
Parameter Number 343
Parameter Type Read/Write, Sink
Display Units / Drive Units None
Factory Default 0
Minimum Value 0 Hex
Maximum Value FFFF Hex
File – Group Communications I/O – SCANport I/O
344 Data Output A2
[Data Out A2]
Data Out A2 contains the second image word from
the SCANport input image table.
Parameter Number 344
Parameter Type Read/Write, Sink
Display Units / Drive Units None
Factory Default 0
Minimum Value 0 Hex
Maximum Value FFFF Hex
File – Group Communications I/O – SCANport I/O
345 Data Output B1
[Data Out B1]
Data Out B1 contains the third image word from the
SCANport input image table.
Parameter Number 345
Parameter Type Read/Write, Sink
Display Units / Drive Units None
Factory Default 0
Minimum Value 0 Hex
Maximum Value FFFF Hex
File – Group Communications I/O – SCANport I/O
346 Data Output B2
[Data Out B2]
Data Out B2 contains the fourth image word from
the SCANport input image table.
Parameter Number 346
Parameter Type Read/Write, Sink
Display Units / Drive Units None
Factory Default 0
Minimum Value 0 Hex
Maximum Value FFFF Hex
File – Group Communications I/O – SCANport I/O
347 Data Output C1
[Data Out C1]
Data Out C1 contains the fifth image word from the
SCANport input image table.
Parameter Number 347
Parameter Type Read/Write, Sink
Display Units / Drive Units None
Factory Default 0
Minimum Value 0 Hex
Maximum Value FFFF Hex
File – Group Communications I/O – SCANport I/O
348 Data Output C2
[Data Out C2]
Data Out C2 contains the sixth image word from the
SCANport input image table.
Parameter Number 348
Parameter Type Read/Write, Sink
Display Units / Drive Units None
Factory Default 0
Minimum Value 0 Hex
Maximum Value FFFF Hex
File – Group Communications I/O – SCANport I/O