Rockwell Automation 1760-xxxx Pico Controller User Manual - Manual (Page 125)

1 Publication 1760-UM001D-EN-P - September 2005
Chapter
5
Save and Load Circuit Diagrams
Interface to Memory
Module and Programming
Cable The Pico controller has a covered interface. You can either use the
Pico interface to save programs to a memory module or use PicoSoft
programming software and the interface cable to transfer them to a
PC.
A Pico controller without a display (1760-L1xxxx-ND) can be loaded
with a program via PicoSoft or automatically from a memory module
every time power is applied.
Use a screwdriver to carefully remove
the interface cover.
To close the interface, push the cover
back onto the opening and snap it
into place.
ATTENTION
ELECTRICAL SHOCK HAZARD
The memory module and PC-cable socket are at the
potential of L2. There is a danger of electric shock if
L2 is not grounded. Do not make contact with
electrical components under the socket cover.