Rockwell Automation 1760-xxxx Pico Controller User Manual - Manual (Page 150)

Publication 1760-UM001D-EN-P - September 2005
6-18 Pico System Settings
The device enables the display of the following device information:
• AC or DC power supply.
• T (transformer output) or R (relay output).
• C (clock provided).
• A (analog output provided).
• LCD (display provided).
• Pico-Link (Pico-Link provided).
• OS: 1.10.204 (operating system version).
• CRC: 25825 (checksum of the operating system).
1. Switch to the main menu.
2. Select the main menu.
3. Use the down arrow to select the INFO... menu.
4. Press Ok.
This displays all device information.
5. Press Esc to exit the display.
IMPORTANT
The device information is always available.
The password does not prevent access.