Rockwell Automation 1760-xxxx Pico Controller User Manual - Manual (Page 189)

1 Publication 1760-UM001D-EN-P - September 2005
Chapter
11
DC Simulator
Description The DC Simulator, catalog number 1760-SIM, can be used to simulate
Pico inputs and outputs to test and troubleshoot programs. The
simulator contains three components: input simulator board, output
simulator board, and wall-mount power supply. The illustration on
page 11-2 shows how to connect the simulator to Pico.
The input simulator board contains 8 maintained push buttons
connected to the 8 inputs of Pico as well as 2 potentiometers
connected to Inputs 7 and 8. The push buttons simulate digital input
devices such as limit switches, proximity sensors, and photoswitches.
The potentiometers can be used to simulate analog input devices such
as temperature and pressure transducers. The output board contains
four LEDs that simulate output devices such as relays, motor starters,
or solenoids.
ATTENTION
The DC simulator can only be used with:
• 1760-L12BWB
• 1760-L12BWB-NC
• 1760-L12BWB-ND
• 1760-L12BBB
• 1760-L12BBB-ND
Use only the power supply provided.