Install on a mounting plate – Rockwell Automation 1760-xxxx Pico Controller User Manual User Manual
Page 29
Advertising
Publication 1760-UM001D-EN-P - September 2005
Installation 2-5
Install on a Mounting Plate
To install the unit using mounting screws:
1. Snap the mounting feet in place.
2. Drill holes at the mounting feet positions, shown below.
3. Mount the controller.
For mounting dimensions, see Dimensions on page A-14.
1760-L12xxx
1760-L18xxx, 1760-L20xxx and
Expansion Modules
Click
1760-OW2
Advertising