Rockwell Automation 1760-xxxx Pico Controller User Manual - Manual (Page 141)

Publication 1760-UM001D-EN-P - September 2005
Pico System Settings 6-9
4. Change the value for the day interval from MO to SA:
• Left and right arrows move between the parameters
• Up and down arrows change value.
• Press Ok to save.
5. Set the switching on time to 19:00.
6. Set the switching off time to 22:00.
7. Press Ok.
Pico saves the new parameters. The cursor remains in the
contact field on channel identifier ’B’.
8. Press Esc to leave the parameter display.
The time switch will now also turn on at 19:00 on Saturdays and
switch off at 22:00.
Set Date, Time, and
Daylight Saving Time If the clock is not set yet or if Pico is powered on after the battery
backup time has been exceeded, the clock starts with the setting SA
0:01 01.05.2004. The Pico clock operates with date and time so the
hour, minute, day, month and year must all be set.
1. Select SET CLOCK from the main menu.
This opens the menu for setting the time.
2. Select SET CLOCK and press Ok.
3. Set the values for day, time, month and year.
• Left and right arrows move between the parameters
• Up and down arrows change the value of a parameter
4. Press Ok to save the day and time or Esc to retain the previous
setting
5. Press Esc to leave the time setting display.
SA
15:21
00:00
00:00
D
+
ON
OFF
1 B
SA
15:21
19:00
00:00
D
+
ON
OFF
1 B
SA
15:21
19:00
22:00
D
+
ON
OFF
1 B
TIP
Pico uses military time, so 1:00 p.m. is 13:00, 7:30
p.m. is 19:30, etc.
SET CLOCK
SUMMER TIME
HH:MM: 18:24
DD.MM: 01.05
YEAR : 2004