Rockwell Automation 1760-xxxx Pico Controller User Manual - Manual (Page 26)

Publication 1760-UM001D-EN-P - September 2005
2-2 Installation
European Communities (EC)
Directive Compliance If this product has the CE mark it is approved for installation within
the European Union and EEA regions. It has been designed and tested
to meet the following directives.
EMC Directive
This product is tested to meet the Council Directive 89/336/EC
Electromagnetic Compatibility (EMC) by applying the following
standards, in whole or in part, documented in a technical construction
file:
• EN 50081-1 EMC — Generic Emission Standard, Part 1 —
Residential, Commercial, and Light Industry
• EN 50082-2 EMC — Generic Immunity Standard, Part 2 —
Industrial Environment
This product is intended for use in an industrial environment.
Low Voltage Directive
This product is tested to meet Council Directive 73/23/EEC Low
Voltage, by applying the safety requirements of EN 50178 Electric
Equipment for Power Installations Equipment Requirements and Tests.
For specific information required by EN 50178, see the appropriate
sections in this publication, as well as the Allen-Bradley publication
Industrial Automation Wiring and Grounding Guidelines For Noise
Immunity, publication 1770-4.1.
This equipment is classified as open equipment and must be mounted
in an enclosure during operation to provide safety protection.