Rockwell Automation 1760-xxxx Pico Controller User Manual - Manual (Page 31)

Publication 1760-UM001D-EN-P - September 2005
Installation 2-7
Removal Procedure
Remove the Remote Processor
1. Insert the screwdriver into the mounting slide.
2. Push screwdriver to the right to open the slide.
3. Remove the processor unit from the display unit.
4. Loosen the fixing rings.
5. Remove the display unit from the panel.
Make Connections
Connect the Power Supply
Remote Processor Power Supply Connection
1760 -RM
1
3
2
1760-RM…
0V 24V
0.6 x 3.5 x 100
L01+ L02+
L01–
> 1 A
Ue = 24 V dc
(20.4 – 28.8 V H dc)
Ie = 150 mA