Rockwell Automation 1760-xxxx Pico Controller User Manual - Manual (Page 138)

Publication 1760-UM001D-EN-P - September 2005
6-6 Pico System Settings
Pico returns to the Status display.
Pressing Esc retains the circuit diagram and data. You can then make
another four attempts to enter the password.
Change the Menu Language Pico Series B Controllers provide twelve menu languages. These can
be set as required via the System menu.
Language selection is only possible if Pico is not password-protected.
1. Press Del and Alt to call up the System menu.
2. Select language as required to modify the menu language.
The language selection for the first entry ENGLISH is displayed.
1. Use up or down arrows to select the new menu language, e.g.
Italian (ITALIANO).
2. Confirm your entry with Ok. Pico shows a check mark next to
the new menu language.
3. Press Esc to return to the status display.
Language LCD display Abbreviaton
English ENGLISH GB
German DEUTSCH D
French FRANCAIS F
Spanish ESPANOL E
Italian ITALIANO I
Portuguese PORTUGUES –
Dutch NEDERLANDS –
Swedish SVENSKA –
Polish POLSKI –
Turkish TURKCE –
Czech CESKY –
Hungarian MAGYAR –
ENGLISH
DEUTSCH
FRANCAIS
ESPANOL
ITALIANO
PORTUGUES
NEDERLANDS
SVENSKA
POLSKI
TURKCE
CESKY
MAGYAR