Metrohm 820 IC Separation Center User Manual

Page 16

Advertising
background image

1 Introduction

819 IC Detector / 820 IC Separation Center

8

14 Feedthrough

for sample, eluent, suppressor re-

agent,…

15 Knurled screw

for fastening rear panel 21, resp. 28.

16 Opening for detector cable B

opening for connecting cable:

detector block B – 819

17 Opening for outlet capillary B

discharge of the eluent of column B to

waste

18 Rear panel opening

(closed with plastic stopper) for addi-

tional supply and discharge lines to

and from the inner compartment

19 Opening for outlet capillary A

discharge of the eluent of column A to

waste

20 Opening for detector cable A and

for connecting cable to the column

heating

opening for connecting cable:

detector block B – 819

column heating – 820 (6.2108.120)

21

Detachable rear panel

access to top part of the inner com-

partment

22 RS 232 interface for column heat-

ing

to connect to 830 IC Interface or PC

with cable 6.2134.040

23 Connection for column heating

with cable 6.2108.120

24 Connection for external power

supply of column heating

with power supply unit 6.2152010

25 Connection for external power

supply of the Separation Center

connection of power supply unit

6.2152.000

(5 V, 0.5 A / 24 V, 2 A) in operation

without 819 IC Detector

26 Terminal block for valve B

Ground, Fill, Inject:

inputs for control of the valve

RUN Pos. / COM Fill:

output signal on switching of the
valve to position "FILL"

RUN Integr. / COM Start:

output signal on switching of the

valve to position "INJECT"

27 Connection for 819 IC Detector

28 Detachable rear panel

access to bottom part of the inner

compartment

29 Model plate with serial number

30 Connection for 819 IC Detector A

31 Terminal block for Valve A

Ground, Fill, Inject:

inputs for control of the valve

RUN Pos. / COM Fill:

output signal on switching of the
valve to position "FILL"

RUN Integr. / COM Start:

Output signal on switching of the
valve to position "INJECT"

32 Opening for inlet capillary B

supply of the eluent for column B

33 Connection for drain tube

for discharge of spilled liquid from the

inner compartment

34 Opening for inlet capillary A

supply of the eluent for column A

Advertising
This manual is related to the following products: