Fig. 13, Connection of 819 and 820 to 830 – Metrohm 820 IC Separation Center User Manual
Page 30
2 Installation
819 IC Detector / 820 IC Separation Center
22
Separate control of the Separation Center
Alternatively you have the possibility of controlling the Separation Cen-
ter with its own time program from «IC Net». This requires you to select
the appropriate
820.0210 to Interface
,
820.0220 to Interface
,
820.0230 to In-
terface
,
820.0310 to Interface
,
820.0320 to Interface
or
820.0330 to Interface
for
the Separation Center when setting up the systems in «IC Net».
Fig. 13:
Connection of 819 and 820 to 830
1 Connect 819 to 830
•
Use 6.2134.090 Cable (830 accessory) to connect Connec-
tion 9 “RS 232” of the 819 IC Detector to a free RS 232 inter-
face of System 1 of the 830 IC Interface (see Fig. 13).
•
Use 6.2134.130 Cable to connect Connection 5 “Output” of
the 819 IC Detector to the analog connection “Channels
1/2” of System 1 of the 830 IC Interface (see Fig. 13).
819
820
6.2134.130
6.2134.090
6.2134.040
830
PC
6.2134.100
6.2115.070
6.2128.100