7 one-channel system with suppressor module, One-channel system with suppressor module, Fig. 23 – Metrohm 820 IC Separation Center User Manual
Page 50: Interior of 2.820.0330 separation center, Fig. 23 ), Fig. 23 ) through one of the feedthrou, Fig. 23 , resp, N 2.9.7 according, Ion 2.9.7 (see fig. 23
Advertising
2 Installation
819 IC Detector / 820 IC Separation Center
42
2.9.7 One-channel
system
with suppressor module
Make sure that the connection separating column outlet – detector
inlet is as short as possible in order to prevent unnecessary peak wid-
ening after the separation.
In the case of the one-channel system with suppressor module, first the
IC separating column is installed in the 2.820.0X30 IC Separation Cen-
ter (see Fig. 23) and then the suppressor module is connected to the
833 IC Liquid Handling Pump Unit needed for operation (see Fig. 24).
Proceed as follows:
Fig. 23:
Interior of 2.820.0330 Separation Center
59
50
53
58
58
57
48
56
70
58
58
51
58
68
63
71
49
56
60
69
64
61
62
67
66
65
Advertising
This manual is related to the following products: