Metrohm 820 IC Separation Center - Manual (Page 69)

3.2 820 IC Separation Center
819 IC Detector / 820 IC Separation Center
61
Manual
The Manual tab of the 820 IC Separation Center window is only available
for a connected system. The parameters and buttons for manual op-
eration depend on the type of instrument connected.
820 IC Separation Center connected to 819 820.0230 Separation Center connected to 830
Configuration Display of current instrument configuration.*
valve A 820 IC Separation Center with 1 injector.
valve A + valve B 820 IC Separation Center with 2 injectors.
valve A + suppressor
820 IC Separation Center with 1 injector and 1
suppressor module.
Valve A
fill/inject Display of current valve position.*
<FILL> Switch valve A to "fill" position.
<INJECT> Switch valve A to "inject" position.
Valve B
fill/inject Display of current valve position.*
<FILL> Switch valve B to "fill" position.
<INJECT> Switch valve B to "inject" position.
Suppressor
in position Display of current suppressor status.*
<STEP> Switch suppressor module to next position.