Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 104)

-104-
Example:
To configure MTU sizes (9000) for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # mtu 9000
4.2.48.62 mvr immediate-leave
Command:
mvr immediate-leave
mvr
Multicast VLAN Registration configuration
immediate-leave
Immediate leave configuration
Default:
Disabled
Usage Guide:
To enable Immediate-leave of MVR for specific interface
Example:
To enable Immediate-leave of MVR for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # mvr immediate-leave
4.2.48.63 mvr name
Command:
mvr name <MvrName : word16> type [receiver | source]
mvr
Multicast VLAN Registration configuration
name
MVR multicast name
<MvrName : word16>
MVR multicast VLAN name
type
MV R port role configuration
receiver
M VR receiver port
source
MVR source port
Default: