Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 119)

-119-
Command:
qos dscp-translate
qos
Quality of Service
dscp-translate
DSCP ingress translation
Default:
Disabled
Usage Guide:
To configure DSCP ingress translation of QoS for specific interface
Example:
To configure DSCP ingress translation of QoS for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # qos dscp-translate
4.2.48.90 qos map cos-tag
Command:
qos map cos-tag cos <Cos : 0~7> dpl <Dpl : 0~1> pcp <Pcp : 0-7> dei <Dei : 0-1>
qos
Quality of Service
map
QoS Map/Table configuration
cos-tag
Map for cos to tag configuration
cos
Specify class of service
<Cos : 0~7>
Specific class of service or range
dpl
Specify drop precedence level
<Dpl : 0~1>
Specific drop precedence level or range
pcp
Specify PCP (Priority Code Point)
<Pcp : 0-7>
Specific PCP
dei
Specify DEI (Drop Eligible Indicator)
<Dei : 0-1>
Specific DEI
Default:
Disabled
Usage Guide:
To configure (QoS class, DP level) to (PCP, DEI) Mapping of QoS for specific interface