Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 142)

-142-
Usage Guide:
To configure IP Subnet-based VLAN for specific interface
Example:
To configure IP Subnet-based VLAN as below table for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # switchport vlan ip-subnet id 1 192.168.1.0/255.255.255.0 vlan 5
4.2.48.128 switchport vlan mac
Command:
switchport vlan mac <mac_ucast> vlan <vlan_id>
switchport
Switching mode characteristics
vlan
VLAN commands
mac
MAC-based VLAN commands
<mac_ucast>
48 bit unicast MAC address: xx:xx:xx:xx:xx:xx
vlan
vl an keyword
<vlan_id>
VLAN ID required for the group to VLAN mapping (Range: 1-4095)
Default:
None
Usage Guide:
To configure MAC-based VLAN for specific interface
Example:
To configure MAC-based VLAN as below table for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X