Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 134)

-134-
Command:
spanning-tree restricted-tcn
spanning-tree
Spanning Tree protocol
restricted-tcn
Restrict topology change notifications
Default:
Disabled
Usage Guide:
To enable Restrict topology change notifications of CIST Normal Port Configuration for specific interface
Example:
To enable Restrict topology change notifications of CIST Normal Port Configuration for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # spanning-tree restricted-tcn
4.2.48.116 speed
Command:
speed [10 | 100 | 1000 | 10g | auto]
speed
Configures interfa ce spee d. If you use 10, 10 0, or 1000 ke ywords with the auto ke yword the port will on ly
advertise the specified speeds.
10
10Mbps
100
10 0Mbps
1000
1Gb ps
10g
10 Gbps
auto
Auto negotiation
Default:
Auto
Usage Guide:
To configure line speed for specific interface
Example:
To configure line speed (1Gbps) for GigabitEthernet X/X