Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 173)

-173-
Command:
End
end Go back to EXEC mode
Default:
Auto
Usage Guide:
To back to EXEC mode
Example:
To back to EXEC mode
Switch# configure terminal
Switch (config)# ip dhcp pool nsswitch
Switch (config-dhcp-pool)# end
Switch#
4.2.56.10 exit
Command:
exit
exit Exit from current mode
Default:
None
Usage Guide:
To exit current mode
Example:
To exit current mode.
Switch# configure terminal
Switch (config)# ip dhcp pool nsswitch
Switch (config-dhcp-pool)# exit
Switch (config)#