Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 115)

-115-
Default:
None (Protected)
Usage Guide:
To configure protected mode of Port-security for specific interface
Example:
To configure protected mode (trap-shutdown) of Port-security for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # port-security violation trap-shutdown
4.2.48.82 pvlan
Command:
pvlan <range_list>
pvlan
Private VLAN
<range_list>
list of PVLANs. Range is from 1 to number of ports.
Default:
None
Usage Guide:
To create PVLAN ID for specific interface
Example:
To create PVLAN ID (5) for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # pvlan 5
4.2.48.83 pvlan isolation
Command:
pvlan isolation
pvlan
Private VLAN
isolation
Port isolation
Default: