Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 126)

-126-
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # qos tag-remark pcp 1 dei 1
4.2.48.101 qos tag-remark mapped
Command:
qos tag-remark mapped
qos
Quality of Service
tag-remark
Tag remarking configuration
mapped
Used mapped values (cos,dpl -> pcp,dei)
Default:
Classified
Usage Guide:
To enable Tag-remark mapped mode of QoS for specific interface
Example:
To enable Tag-remark mapped mode of QoS for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # qos tag-remark mapped
4.2.48.102 qos trust dscp
Command:
qos trust dscp
qos
Quali ty of Service
trust
Trust configuration
dscp
DSC P value
Default:
Disabled
Usage Guide:
To enable DSCP Classification of QoS for specific interface