Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 95)

-95-
Fast
Usage Guide:
To configure LACP timeout type for specific interface
Example:
To enable LACP timeout type (slow) for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # lacp timeout slow
4.2.48.45 lldp cdp-aware
Command:
lldp cdp-aware
lldp
LLDP configurations
cdp-aware
Configures if the interface shall be CDP aware (CDP discovery information is added to the LLDP neighbor
table)
Default:
Passive
Usage Guide:
To configure MIB variable retrieve local info or remote info of LLDP for specific interface
Example:
To configure MIB variable retrieve (local info) of LLDP for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # lldp cdp-aware
4.2.48.46 lldp med media-vlan policy-list
Command:
lldp med media-vlan policy-list <v_range_list>
lldp
LLDP configurations
med
Media Endpoint Discovery
media-vlan
Media VLAN assignment