Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 84)

-84-
4.2.48.23 green-ethernet short-reach(GG)
Command:
green-ethernet short-reach
green-ethernet Green ethernet (Power reduction)
short-reach
Enable power saving for ports which is connect to link partner with short cable.
Default:
N/A
Usage Guide:
To enable power saving for ports with short cable
Example:
To enable power saving for ports with short cable for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # green-ethernet short-reach
4.2.48.24 gvrp join-request vlan(GG)
Command:
gvrp join-request vlan <vlan_list>
gvrp Enable GVRP on port(s)
join-request
Emit a Join-Request for test purpose
Default:
N/A
Usage Guide:
To send GVRP Join-Request to specific interface
Example:
To send GVRP Join-Request(VLAN 1) to GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # gvrp join-request vlan 1