Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 140)

-140-
Example:
To enable PVID (5) in Hybrid VLAN mode for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # switchport hybrid native vlan 5
4.2.48.125 switchport hybrid port-type
Command:
switchport hybrid port-type c-port | s-custom-port | s-port | unaware
switchport
Switching mode characteristics
hybrid
Change PVID for hybrid port
port-type
Set port type
c-port
Customer port
s-custom-port
Custom Provider port
s-port
Provider port
unaware
Port in not aware of VLAN tags.
Default:
C-port
Usage Guide:
To configure Port type in Hybrid VLAN mode for specific interface
Example:
To enable Port type (Unaware) in Hybrid VLAN mode for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # switchport hybrid port-type unaware
4.2.48.126 switchport mode
Command: