Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 113)

-113-
Switch (config-if) # poe time-range profile3
4.2.48.78 port-security
Command:
port-security
port-security
Enable/disable port security per interface.
Default:
Disabled
Usage Guide:
To enable Port-security for specific interface
Example:
To enable Port-security for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # port-security
4.2.48.79 port-security maximum
Command:
port-security maximum <Number of addresses : 1-1024>
port-security
Enable/disable port security per interface.
maximum
Maximum number of MAC addresses that can be learned on this set of interfaces.
<Number of addresses : 1-1024>
N umber of addresses
Default:
None
Usage Guide:
To configure number of Port-security addresses for specific interface
Example:
To configure 100 Port-security addresses for GigabitEthernet X/X
Switch# configure terminal