Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 202)

-202-
To enter line mode (vty 1)
Switch# configure terminal
Switch (config)# line vty 1
Switch (config-line)#
4.2.86.1 do
Command:
do < exec commands >
do To run exec commands.
Default:
N/A
Usage Guide:
To run exec commands.
Example:
To run “show aaa”.
Switch# configure terminal
Switch (config)# line vty 1
Switch (config-line)# do show aaa
console : local
telnet : local
ssh : local
http : local
4.2.86.2 editing
Command:
editing
editing Ena ble command line editing
Default: