Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 155)

-155-
query-interval
Query Interval in seconds
<IpmcQi : 1-31744>
1 - 31744 seconds
Default:
125
Usage Guide:
To configure Querier-interval of IGMP snooping for specific VLAN
Example:
To configure Querier-interval (600 seconds) of IGMP snooping for VLAN X
Switch# configure terminal
Switch (config)# interface vlan X
Switch (config-if-vlan)# ip igmp snooping query-interval 600
4.2.49.15 ip igmp snooping query-max-response-time
Command:
ip igmp snooping query-max-response-time <IpmcQi : 1-31744>
ip Interface Internet Protocol config commands
igmp
Internet Group Management Protocol
snooping
Snooping IGMP
query-max-response-time
Query Response Interval in tenths of seconds
<IpmcQri : 0-31744>
0 - 31744 tenths of seconds
Default:
125
Usage Guide:
To configure Querier-interval of IGMP snooping for specific VLAN
Example:
To configure Querier-interval (60 seconds) of IGMP snooping for VLAN X
Switch# configure terminal
Switch (config)# interface vlan X
Switch (config-if-vlan)# ip igmp snooping query-max-response-time 600