Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 248)

-248-
Command:
periodic { Mon | Tue | Wed | Thu | Fri | Sat | Sun } <start_h> <start_m> to <end_h>
<end_m> [ reboot <reboot_h> <reboot_m> ]
periodic
To create a periodic mode time-range for the PoE time-range of the switch.
Fri
Periodic Mode, with Friday.
Mon
Periodic Mode, with Monday.
Sat
Periodic Mode, with Saturday.
Sun
Periodic Mode, with Sunday.
Thu
Periodic Mode, with Thursday.
Tue
Periodic Mode, with Tuesday.
Wed
Periodic Mode, with Wednesday.
< start_h: 0-23>
<0-23> start hour
< start_m: 0-59>
<0-59> start minute
to
start to end
< end_h: 0-23>
<0-23> end hour
< end_m: 0-59>
<0-59> end minute
reboot
Enable reboot function
< reboot_h: 0-23>
<0-23> reboot hour
< reboot_m:0-59>
<0-59> reboot minute
Default:
N/A
Usage Guide:
To configure the Power Over Ethernet Schedule for specific profile.
Example:
To configure the Power Over Ethernet Schedule (below table) for specific profile 1.
Switch# configure terminal
Switch (config)# poe-time-range profile1
Switch (config-poe-time-range)# periodic Mon 11 59 to 22 50 reboot 11 44
4.2.145.6 reboot-only
Command: