Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 128)

-128-
interval
Interval to sample data for each bucket. Default is 1800 seconds
Default:
N/A
Usage Guide:
To configure RMON History Configuration for specific interface
Example:
To configure RMON History Configuration as below table for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # rmon collection history 1 buckets 5 interval 3
4.2.48.105 rmon collection stats
Command:
rmon collection stats <1-65535>
rmon
Configure Remote Monitoring on an interface
collection
Configure Remote Monitoring Collection on an interface
stats
Configure statistics
Default:
0
Usage Guide:
To configure RMON Statistics Configuration for specific interface
Example:
To configure RMON Statistics Configuration (2) as below table for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # rmon collection stats 2