Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 195)

-195-
Switch (config-ipmc-profile)#end
Switch#
4.2.77.5 exit
Command:
exit
exit Exit from current mode
Default:
None
Usage Guide:
To exit current mode
Example:
To exit current mode.
Switch# configure terminal
Switch (config)# ipmc profile interlogix
Switch (config-ipmc-profile)# exit
Switch (config)#
4.2.77.6 no
Command:
no
no
Negate a command or set its defaults
Default:
N/A
Usage Guide:
To default the function.
Example:
To enable the function (description 999).