Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 276)

-276-
Usage Guide:
To configure Trap Host of SNMP
Example:
To configure Trap Host (below table) of SNMP
Switch# configure terminal
Switch (config)# snmp-server host interlogix
Switch (config-snmps-host)# host interlogix.com 66 informs
4.2.175.5 no
Command:
no
no
Negate a command or set its defaults
Default:
N/A
Usage Guide:
To default the function
Example:
To disable the function (host interlogix.com 66 informs)
Switch# configure terminal
Switch (config)# snmp-server host interlogix
Switch (config-snmps-host)# no ip address dhcp
4.2.175.6 informs
Command: