Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 133)

-133-
Default:
Auto
Usage Guide:
To configure Path Cost of CIST / MST Normal Port Configuration for specific interface
Example:
To enable Path Cost (32) of CIST / MST Normal Port Configuration (CIST) for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # spanning-tree mst 0 port-priority 32
4.2.48.114 spanning-tree restricted-role
Command:
spanning-tree restricted-role
spanning-tree
Spanning Tree protocol
restricted-role
Port role is restricted (never root port)
Default:
Disabled
Usage Guide:
To enable Restricted-role of CIST Normal Port Configuration for specific interface
Example:
To enable Restricted-role of CIST Normal Port Configuration for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # spanning-tree restricted-role
4.2.48.115 spanning-tree restricted-tcn