Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 127)

-127-
Example:
To enable DSCP Classification of QoS for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # qos trust dscp
4.2.48.103 qos trust tag
Command:
qos trust tag
qos
Quality of Service
trust
Trust configuration
tag
VLAN tag
Default:
Disabled
Usage Guide:
To enable VLAN tag Classification of QoS for specific interface
Example:
To enable VLAN tag Classification of QoS for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # qos trust tag
4.2.48.104 rmon collection history
Command:
rmon collection history <1-65535> buckets <1-65535> interval <1-3600>
rmon
Configure Remote Monitoring on an interface
collection
Configure Remote Monitoring Collection on an interface
history
Co nfigure history
buckets
Requested buckets of intervals. Default is 50 buckets