Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 274)

-274-
do < exec commands >
do To run exec commands.
Default:
N/A
Usage Guide:
To run exec commands.
Example:
To run “show aaa”.
Switch# configure terminal
Switch (config)# snmp-server host interlogix
Switch (config-snmps-host)#do show aaa
console : local
telnet : local
ssh : local
http : local
4.2.175.2 end
Command:
end
end Go back to EXEC mode
Default:
Auto
Usage Guide:
To back to EXEC mode
Example:
To back to EXEC mode
Switch# configure terminal
Switch (config)# snmp-server host interlogix
Switch (config-snmps-host)#end
Switch#