Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 205)

-205-
4.2.86.6 exec-timeout
Command:
exec-timeout <0-1440>
exec-timeout Set the EXEC timeout
<0-1440>
T imeout in minutes
Default:
N/A
Usage Guide:
To configure EXEC timeout
Example:
To configure EXEC timeout (10 minutes)
Switch# configure terminal
Switch (config)# line vty 1
Switch (config-line)# exec-timeout 10
4.2.86.7 exit
Command:
exit
exit Exit from current mode
Default:
None
Usage Guide:
To exit current mode
Example:
To exit current mode.
Switch# configure terminal
Switch (config)# line vty 1