Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 78)

-78-
Example:
To run “show aaa” in configure terminal mode.
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # do show aaa
console : local
telnet : local
ssh : local
http : local
4.2.48.12 dot1x guest-vlan
Command:
dot1x guest-vlan
dot1x IEEE Standard for port-based Network Access Control
guest-vlan
Enables/disables guest VLAN
Default:
Disable
Usage Guide:
To enable Guest VLAN
Example:
To enable Guest VLAN for GigabitEthernet X/X.
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # dot1x guest-vlan
4.2.48.13 dot1x port-control
Command:
dot1x port-control auto | force-authorized | force-unauthorized | mac-based | multi |
single
dot1x IEEE Standard for port-based Network Access Control
port-control
Sets the port security state.
auto Port-base d 802.1X Authentication
force-authorized Port access is allowed
force-unauthorized Port access is not allowed