Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 139)

-139-
4.2.48.123 switchport hybrid ingress-filtering
Command:
switchport hybrid ingress-filtering
switchport
Switching mode characteristics
hybrid
Change PVID for hybrid port
ingress-filtering
VLAN Ingress filter configuration
Default:
Enabled
Usage Guide:
To enable Ingress-filtering with Hybrid VLAN mode for specific interface
Example:
To enable Ingress-filtering with Hybrid VLAN mode for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # switchport hybrid ingress-filtering
4.2.48.124 switchport hybrid native vlan
Command:
switchport hybrid native vlan <vlan_id>
switchport
Switching mode characteristics
hybrid
Change PVID for hybrid port
native
Set native VLAN
vlan
Set native VLAN when interface is in hybrid mode
<vlan_id>
VLAN ID of the native VLAN when this port is in hybrid mode
Default:
1
Usage Guide:
To configure PVID in Hybrid VLAN mode for specific interface