Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 129)

-129-
4.2.48.106 shutdown
Command:
shutdown
shutdown
Shutdown of the interface.
Default:
No shutdown
Usage Guide:
To shut down specific interface
Example:
To shut down GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # shutdown
4.2.48.107 spanning-tree
Command:
spanning-tree
spanning-tree
S panning Tree protocol
Default:
Disabled
Usage Guide:
To enable STP for specific interface
Example:
To enable STP for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # spanning-tree