Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 99)

-99-
Switch (config-if) # lldp tlv-select system-capabilities
4.2.48.52 lldp tlv-select system-description
Command:
lldp tlv-select system-description
lldp
LLDP configurations
tlv-select
To transmit which optional TLVs.
system-description
Enable/Disable transmission of system description.
Default:
Enabled
Usage Guide:
To enable system-description of LLDP TLV for specific interface
Example:
To enable system-description of LLDP TLV for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # lldp tlv-select system-description
4.2.48.53 lldp tlv-select system-name
Command:
lldp tlv-select system-name
lldp
LLDP configurations
tlv-select
T o transmit which optional TLVs.
system-name
Enable/Disable transmission of system name.
Default:
Enabled
Usage Guide:
To enable system-name of LLDP TLV for specific interface
Example:
To enable system-name of LLDP TLV for GigabitEthernet X/X
Switch# configure terminal