Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 152)

-152-
Auto
Usage Guide:
To configure IGMP snooping version for specific VLAN
Example:
To configure IGMP snooping V2 for VLAN X
Switch# configure terminal
Switch (config)# interface vlan X
Switch (config-if-vlan)# ip igmp snooping compatibility v2
4.2.49.10 ip igmp snooping last-member-query-interval
Command:
ip igmp snooping last-member-query-interval <IpmcLmqi : 0-31744>
ip Interface Internet Protocol config commands
igmp
Internet Group Management Protocol
snooping
Snooping IGMP
last-member-query-interval
Last Member Query Interval in tenths of seconds
<IpmcLmqi : 0-31744>
0 - 31744 tenths of seconds
Default:
10
Usage Guide:
To configure Last-member-query-interval of IGMP snooping for specific VLAN
Example:
To configure Last-member-query-interval (100 seconds) of IGMP snooping for VLAN X
Switch# configure terminal
Switch (config)# interface vlan X
Switch (config-if-vlan)# ip igmp snooping last-member-query-interval 1000
4.2.49.11 ip igmp snooping priority