Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 177)

-177-
<LINE>
Netbios scope identifier, in 128 characters
Default:
None
Usage Guide:
To configure NetBIOS scope of DHCP Server.
Example:
To configure NetBIOS scope (interlogix) of DHCP Server for pool “nsswitch”.
Switch# configure terminal
Switch (config)# ip dhcp pool nsswitch
Switch (config-dhcp-pool)# netbios-scope interlogix
4.2.56.17 network
Command:
network <IP: A.B.C.D> <Subnet: A.B.C.D>
network
Network number and mask
<IP: A.B.C.D>
Net work number
<Subnet: A.B.C.D>
Network mask in dotted-decimal notation, excluding 255.255.255.255
Default:
None
Usage Guide:
To configure Network IP address of DHCP Server.
Example:
To configure Network IP address (192.168.1.11/24) of DHCP Server for pool “nsswitch”.
Switch# configure terminal
Switch (config)# ip dhcp pool nsswitch
Switch (config-dhcp-pool)# network 192.168.0.11 255.255.255.0