Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 86)

-86-
Switch (config-if) # ip arp inspection check-vlan
4.2.48.27 ip arp inspection logging
Command:
ip arp inspection logging all | deny | permit
arp Address Resolution Protocol
inspection
ARP inspection
logging
ARP inspection logging mode config
all
log all entries
deny
log denied entries
permit
log permitted entries
Default:
None
Usage Guide:
To configure Logging type into ARP inspection for specific interface
Example:
To configure Logging type (All) into ARP inspection for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # ip arp inspection logging all
4.2.48.28 ip arp inspection trust
Command:
ip arp inspection trust
arp Address Resolution Protocol
inspection
ARP inspection
trust
ARP inspection trust config
Default:
Trusted
Usage Guide:
To configure Trusted into ARP inspection for specific interface
Example: