Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 209)

-209-
level
Assign default privilege level for line
<0-15>
Default privilege level for line
Default:
15
Usage Guide:
To configure privilege level
Example:
To configure privilege level (5) for vty 1.
Switch# configure terminal
Switch (config)# line vty 1
Switch (config-line)# privilege level 5
4.2.86.14 width
Command:
width <0 or 40-512>
width
Set width of the display terminal
<0 or 40-512>
Number of characters on a screen line (0 for unlimited width)
Default:
0
Usage Guide:
To configure width of the display terminal.
Example:
To configure width (50) of the display terminal for vty 1.
Switch# configure terminal
Switch (config)# line vty 1
Switch (config-line)# width 50