Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 216)

-216-
Command:
lldp timer <5-32768>
lldp LLDP configurations.
timer
Sets LLDP TX interval (The time between each LLDP frame transmitted in seconds)
<5-32768>
5-32768 seconds.
Default:
30
Usage Guide:
To configure Tx interval time of LLDP
Example:
To configure Tx interval time (555) of LLDP
Switch# configure terminal
Switch (config)# lldp timer 555
4.2.97 lldp transmission-delay
Command:
lldp transmission-delay <1-8192>
lldp LLDP configurations.
transmission-delay
Set s LLDP transmision- delay. LLDP trans mission de lay (the amount of time that the
transmission of LLDP frames will delayed after LLDP configuration has changed) in seconds.)
<1-8192>
1-81 92 seconds.
Default:
2
Usage Guide:
To configure Tx transmission-delay time of LLDP
Example:
To configure Tx transmission-delay time (88) of LLDP
Switch# configure terminal
Switch (config)# lldp transmission-delay 88