Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 110)

-110-
Usage Guide:
To configure PD Ping Alive Check interval of PoE for specific interface.
Example:
To configure PD Ping Alive Check interval (100 seconds) of PoE for GigabitEthernet X/X.
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # poe pdcheck interval 100
4.2.48.73 poe pdcheck reboot-time
Command:
poe pdcheck reboot-time <30-180>
poe
Power Over Ethernet.
pdcheck
Allows user to enable or disable per port PD Alive Check function.
reboot-time
set the PoE device rebooting time.
<30-180>
reboot-time <30-180>
Default:
90
Usage Guide:
To configure PD Ping Alive Check rebooting time of PoE for specific interface.
Example:
To configure PD Ping Alive Check rebooting time (100 seconds) of PoE for GigabitEthernet X/X.
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # poe pdcheck reboot-time 100
4.2.48.74 poe pdcheck retry-count
Command:
poe pdcheck retry-count <1-5>
poe
Power Over Ethernet.
pdcheck
Allows user to enable or disable per port PD Alive Check function.
retry-count
set how many times system retry ping to PD.