Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 82)

-82-
4.2.48.19 excessive-restart
Command:
excessive-restart
excessive-restart Restart backof f al gorithm after 1 6 coll isions (N o e xcessive-restart means d iscard frame after 16
collisions)
Default:
Discard
Usage Guide:
To enable Backoff Algorithm for the specific interface
Example:
To enable Backoff Algorithm for the GigabitEthernet X/X.
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # excessive-restart
4.2.48.20 exit
Command:
exit
exit Exit from current mode
Default:
None
Usage Guide:
To exit current mode
Example:
To exit current mode.
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # exit
Switch (config)#