Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 138)

-138-
Default:
All
Usage Guide:
To configure VLAN list of Hybrid VLAN for specific interface
Example:
To configure VLAN list (None) of Hybrid VLAN for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # switchport hybrid allowed vlan none
4.2.48.122 switchport hybrid egress-tag
Command:
switchport hybrid egress-tag [none | all | all except-native]
switchport
Switching mode characteristics
hybrid
Change PVID for hybrid port
egress-tag
Egress VLAN tagging configuration
all
Tag all frames
none
No egress tagging
except-native
Tag all frames except frames classified to native VLAN of the hybrid port
Default:
Untagged Port VLAN
Usage Guide:
To configure Egress Tagging VLAN mode for specific interface
Example:
To configure Egress Tagging VLAN mode (None) for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # switchport hybrid egress-tag none