Altera Cyclone II DSP Development Board - Manual (Page 60)

2–52 Reference Manual Altera Corporation
Cyclone II DSP Development Board August 2006
General Connectors
Active Serial Interface (ASI) Connector (J13)
The active serial interface (ASI) connector is used to program the EPCS64,
U17 and U36, using the Quartus II software. See
Figure 2–17 .
For more information about using J13, see “EPCS64 Flash Memory
Devices (U17, U36)” on page 2–38 .
Figure 2–17. Active Serial Interface Connector With JTAG Cable to Program the
EPCS64 Flash Memory
J13
ASI Connector
JTAG Cable